Showing posts with label Bantam. Show all posts
Showing posts with label Bantam. Show all posts

18 September 2016

Cycling in Seattle in September

Lake Washington -- from Warren Magnuson Park boat launch ramp
I recently spent a week in Seattle, at and around the University of Washington. I must say that I was impressed with the support that Seattle offers for cycling, in many ways similar to that seen in Portland, its neighbor to the South. My past experience with Seattle, featuring Interstate 5 traffic jams, a big city downtown, and a couple of seemingly endless local trips out to the suburbs during rush hour, had led me to think that Seattle might not be a good place to be a cyclist. I stand corrected.
Typical I-5 traffic approaching Seattle from the South 730AM one morning.
The first revelation was the bike share program -- lime-ish green bikes sponsored by Alaska Airlines, in contrast to Portland's orange Nike-sponsored bikes and New York's Citigroup bikes. These bikes have been around much longer than Portland's, and the racks I saw -- one just a block from my hotel -- had many open slots with bikes out for use (or repair).
Bike share station in the University District
The second revelation was on the SIR brevet.  I could not discern much leaving town starting from 6AM Saturday and heading out to the South/Southeast along the shore of Lake Washington. Of course, at that hour, there was almost no traffic.
On a trail near Renton southeast of Seattle. Gravel surface here.
But coming back into town along the paved Burke-Gilman trail was really great. This route brought us more than 25 kms from the edge of town all the way past the University, all on a dedicated trail. Most of the way it was relatively wide, smooth and fast. Somehow in a very hilly city, it managed to avoid any steep grades -- understandable where it is a former railroad bed.  Of course, the hard-core SIR members on the "gravel grinder" included a number of folks who ride everywhere, in city as well as out.

Then on Tuesday at the university, I noticed some nice support for cyclists - parking with a roof, bike storage lockers, pumps and repair tools available, convenient parking. This is summarized at the UW bikeshare website, which notes that UW is a "Bicycle Friendly University", the only one in Washington, America's most bicycle friendly state! And on a ferry trip to Bainbridge Island for dinner at a friend's places, I could see many spandex-clad cyclists, taking the ferry on an intermodal ferry/bicycle commute.
At least there is a roof over your bike when it rains.
No need to bring wrenches on a daily commute
$140 a year according to the UW bikeshare website.  Lots of other support.





The beauty of Seattle's skyline from the ferry -- photos do not do it justice. Magical on a calm, warm evening.


Next, mid-week, I took a ride on the Bantam Oregon randonneur bike into town to visit a high school friend who lives between Seattle Center and downtown.  Most of the way I was in a bike lane or otherwise a well-travelled commuter route.  Very nice.

The next day I took a quick exercise ride back out to the North and East of the University District.  I thought I would find Burke-Gilman, but somehow missed it and ended up at Warren Magnuson Park. Eventually I found the trail and took in on a very fast return trip.

Appropriate sculpture for Boeing's town - airplane stabilizers as sculpture at Magnuson Park.

Rain always close, even when you can see blue sky.
If Portland is Beervana, Seattle is coffee paradise. The city is home to Starbucks, of course, but also Tully's and Seattle's Best, among myriad others.
All-in-all, a very bikeable city, even if fenders and good rain gear needed most of the year!
Mt. Rainier from my hotel -- finally shows itself fully near end of the week!

09 September 2015

Oregon Randonneur - More Photos

I picked up the Oregon randonneur bike this morning.  Satisfied customer photo should soon be on Bob's Flickr.

It rides beautifully -- rock solid and steady, very stable.  How fast and comfortable is it?  Too soon to tell.  I only rode it a few blocks, had Bob adjust the seat to the proper height, and rode a bit more, before loading it into the car.  Tomorrow it gets a full test.  For now, some photos of the finished bike!

I could not resist the picket fence at this house across from Bob's shop for some photos.

Mafac "Racer" brakes work very well -- good stopping power, and plenty of clearance with fenders and 700x30mm tires.  Nice Swiss-stop brake pads.



Custom, handmade front rack, and decaleur.  The decaleur latches the Gout Watanabe front bag onto the bike.  It releases with a simple pull with one finger on the right-side ring.


Decaleur attaches to the quill stem
Rack and Supernova E3 Pro 2 light, powered by dynamo hub
SV-8 dynamo hub from Shutter Precision
Front view including the "B" Bantam logo

One of my favorite lights

Fork blades and crown are Columbus, the rest of the tubing is mostly
True Temper .8/.5 /.8 mm double butted (made in America)
Supernova rear light ... and internal cable routing!


Honjo Koken hammered fenders
Sugino crankset, avoids the need for an (ugly) Shimano crank to go with the rest of the groupset.

Chris King headset -- made in Oregon, actually made in Portland.

Beautiful sports leather bar tape from DiPell
The cockpit.  Nice map cover, plenty of room for hands around the edge of the bag.

Nitto "grand raundoneur" [sp] handlebars.  I think with this set up I will spend more time in the drops and out on the brifter hoods, and less on the tops of the bars.  But plenty of opportunity to move hands around in different positions to avoid numbness/nerve injury on long rides.


Wheels built by Bob.

Velocity A23 polished rims
Grand Bois tires -- a favorite with randonneurs.
S and S Couplers!
More beautiful workmanship
Bantam Bicycle #0023
I got some of Bob's business cards ... just in case I get any inquiries during Cycle Oregon

05 September 2015

Oregon Randonneur bike ready to roll!

The Oregon randonneur bike is done and ready to roll for Cycle Oregon 2015!  Thanks to Bob Kamzelski of Bantam Bicycles for designing and building what looks like a beautiful, purpose-built machine.  Made in Oregon ... with quite a few parts from Japan (mostly via Hiroshi Koyama at C Speed.  I will try to post a full parts list in due course.
The bike is ready for Cycle Oregon. Is my body recoverd from PBP?  Well, not fully, but I still have a week, and I am looking at Cycle Oregon as a kind of "warm down" ride for the year.  Fully supported, known for good food and drink. ...
Lots of photos are available on Bantam's flicker album here

And more photos here on this later post from when I picked up the bike!


21 June 2015

Oregon Randonneur Bike Under Construction - Bantam Bicycle Works

After my post a couple days back about the "made in Japan" parts I am sending off to Bob Kamzelski for the "made in Oregon" randonneur bike, Bob was kind enough to forward a few more photos of my frame in construction at the Bantam Bicycle Works shop.

This is what framebuilding looks like when you use silver brazing paste and lugs to "give birth to" a new bicycle frame.  Much more messy than the almost antiseptic TIG welding process!  (And the acetyline torch produces a More like an artist doing something creative.  Less like a factory where the humans might be replaced by, well, the robotic welders of a Nissan or Toyota factory.






The beauty of lugs -- some bicycle fans can get a bit obsessive on the topic.


Ready for some Mafac Racer brakes
Why the gap in the downtube?  S and S couplers, of course!
UPDATE:

The frame is done, including couplers (though still needs racks, paint, etc. ...)  You can see photos on Bob's Flickr photostream here.  The full frame looks like this:
... but you should check out the photostream for more photos of beautiful lugs, the bridge between the seat stays, and more!