05 November 2012

Cycle Mode 2012 - Makuhari Messe

I have not been to Cycle Mode -- the closest thing Japan has to EuroBike or InterBike --  in a number of years ...  usually it conflicts with some great riding weather, and there is nothing new under the sun, or very little.  And I have heard grumbling from exhibitors -- it takes a lot of time, effort and money, and in Japan the show does not seem to translate into sales for most companies.

But after missing it for a few years, and getting more interested in "the industry", I thought I should attend.

This year Trek, Giant and Specialized were noticeably absent, though Pinarello, Colnago, Chesini, De Rosa and other Italian brands were there.  Cervelo had a small display.  Shimano was there, of course, and Campy Japan.  I did not see SRAM.  Presumably whether someone participates has a lot to do with the specific importer/distributor relationships and whether companies feel they can avoid the show without it damaging their business and prospects.  It is a "command performance" for major Japanese brands, and for some others trying to expand here.

There were a few highlights for me.

1.  Chesini.  Of course, stopping by the Chesini booth, to see Hiroshi Koyama, and also meet Mr. Chesini and his daughter (in law?) visiting from Verona.  Hiroshi has been actively promoting the Chesini brand in Japan via C Speed.  It is a small brand, but has a long history, back to 1925, and its bikes have some world championship victories to their credit.  Chesini is to Verona what Sambi is to Ravenna?  But more so.

2.  Gokiso Hubs.  Are these the best hubs in existence?  Tim Smith (GS Astuto) and David Marx (RGT Enterprises) are big fans, and they come highly reviewed.  As I was leaving, I saw Tim Smith just entering the show.  He was headed over to say hello to Kondo-san at Gokiso.  David Marx was home in Nagoya, but told me he loves his Gokiso hubs and that I should check them out.

At the well-manned booth, I was given a demonstration of how perfectly balanced and responsive a wheel can be -- to the point where adding a plastic valve cap would be enough weight to start the wheel rotating.  And they explained how the hubs are designed to avoid damage to the internals, especially the bearings, in both installation and with a suspension to protect from impacts while riding.  They start with ball bearings designed for aerospace applications.

But the cost is a bit much for a mere mortal like me (around $3000 for a set retail).  Great for a show bike, or for Alberto Contador.  Difficult for me to justify.  And as my instructor said at my UBI framebuilding course in February, "we are not flying these things to the moon" ... Bicycles really do not require aerospace precision.

3.  Randonneur bikes at Grand Bois.  I must be getting older.  Or maybe it is just that I have lost what remained of my interest in bike racing following the Lance Armstrong USADA report.  Instead of checking out the latest racing models from Pinarello and the latest in carbon deep wheels, I found myself drawn to the Grand Bois booth.  Grand Bois is a brand of classic and retro bikes and components developed by I's Bicycles in Kyoto.  I think Jan Heine/Compass Bikes handle their products in the U.S.  They had a classic Rene Herse bike from way back (1950s?) on display.



Grand Bois hubs -- retro styling, but modern internals and the convenience of QR skewers.
4.  Different bikes, New bikes.  There were plenty of folding bikes, some belt drives, some wooden handmade bikes, and a modern looking design with the front and rear lights integrated into the top tube ... nice fashion accessory, though not sure I could see myself riding it.  The folders and the belt drive looked like the wheel bases were too short for me.

Strida, the only belt drive model I saw ... though there were probably more. (You need a monostay, like this, or a notch in one side of the seat stays, to fit a belt drive onto a bike).  A UK brand, apparently.

Vanmoof bike with Philips front and rear lights integrated in the top tube.
Internal gear Sturmey Archer rear hub.  Dynamo front hub, both with drum brakes.

5.  Handmade bicycles.  Cycle Mode now has a special area for framebuilders, and around 8 to 10 of them had their wares on display.  There was also a stage set up for a presentation by the builders.  Of courser, Cherubim had a display.  It was not crowded, so I took the chance to say hello to Shin-ichi Konno, one of the most celebrated framebuilders of his generation and winner of the NAHBS "best in show" award twice in recent years.  And there was a display for a new vocational school -- Tokyo College of Cycle Design, that opened this year.
Cherubim's take on the classic racer.  With a more modern tandem below.

Konno-san and the NAHBS winning bike, plus some beautiful lugs on the headtubes/fork crowns in the foreground.

The stem on Cherubim's sleek, modern version of a racer.  Nothing but Campy in the entire booth.  
Nagasawa-san, the Keirin builder, was there.  As were others.  I liked a bike on display by a Kyoto-based woman framebuilder, Yuka Kitajima.  It was a touring bike with the racks designed for carrying food and drink to a picnic -- wine glasses, tabasco sauce etc. on board.  The steel frame had some very nice etching, and the front rack/fender support was hollow for storage of a spare spoke.  Not that practical, but fun.
The distinctive Nagasawa logo ... Blogger seems to want to show it upside down.

Etching on Yuka Kitajima's steel framed pizza picnic bike.

Spare spoke fits inside the fender attachment.
I rode my bike about 20 kms to Hacchobori, then put it in the bag and hopped the Keiyo Line the rest of the way out -- a fast way to get to Makuhari.  On the way home, I rode the entire way.  It was about 50 kms, taking Route 14 most of the way from Makuhari into Tokyo.  I needed to hunt a bit for a decent route as I got closer to Tokyo, but it was tolerable, and good for future reference.  ... since I might even go back to Cycle Mode next year.

4 comments:

2309 Blake said...

Thanks for the Cycle Mode review. Do you happen to know if the handbuilt custom component of the show is growing? The Tokyo College of Cycle Design would seem a natural primer for this part of the show hall, even though several of the graduates get jobs with mass-producers in the bike industry.

David Litt said...

I am afraid I do not know.
Cycle Mode continues to target newbies for the most part ... so not sure if they have succeeded with or grown the handmade segment. ...

mob said...

It seems that the "Tokyo hand made bike show" has exited cycle mode and became an independent event. Unfortunately you have just missed it, it was held on Jan. 23-24 at the bicycle culture centre in the science museum close to Kudanshita station.

http://www.cycle-info.bpaj.or.jp/?tid=100234

2309 Blake said...

If east Asia now has a handmade custom bicycle show, that's big news for the artisan sector. First North America, then Europe (Bespoked) and now Asia. I will have to make sure I get to Tokyo for the 2017 show.